What does code U0140 mean?

U0140 — Lost communication with Body Control Module (BCM). Windows, mirrors, central lock, lighting may all fail. Belongs to the network.lostcomm system. Severity: critical.

What are the common causes of U0140?

Break in CAN to BCM — often after aftermarket alarm installation; Bus short; BCM lost power — fuse; Bad BCM ground; Failed BCM

Can I drive with code U0140?

Not recommended. Continued driving can damage the engine, transmission, or catalyst. Use a tow truck or take the shortest possible route to a workshop.

How do I diagnose U0140?

Read the code and freeze-frame with a scanner, check related-system errors, inspect the components listed (wiring, connectors, sensors). See the "How to diagnose" section above for the full step-by-step.

How do I clear code U0140?

The code can be cleared via an OBD-II scanner (e.g. ELM327 + the Car Diagnostics app): plug the adapter into the OBD port, go to Errors → Clear. If the underlying cause isn't fixed, the code will return within a few drive cycles.

OBD-II Code U0140 — Car Diagnostics Platform

What it means

Common causes

Break in CAN to BCM — often after aftermarket alarm installation
Bus short
BCM lost power — fuse
Bad BCM ground
Failed BCM
Protocol issue after another module's firmware update

How to diagnose

01
Read all stored and pending codes with an OBD-II adapter — get the full picture, not just the one code.
02
Capture freeze-frame data (RPM, coolant temperature, engine load) at the exact moment the code triggered.
03
Inspect the named subsystem with our app's AI explanation — get vehicle-specific causes for your make, model and year.

Decode U0140 on your actual car

Plug in an OBD-II adapter and get an AI-powered diagnosis tailored to your vehicle make, model and year — in 30 seconds.

Try the demo