What does code P0141 mean?

P0141 — Heater malfunction on Bank 1 Sensor 2. Sensor present but not heating — takes too long to reach operating temperature or doesn't reach at all. Belongs to the powertrain.o2 system. Severity: warning.

What are the common causes of P0141?

Open heater element — sensor needs replacement; Break in heater power wire; Heater shorted to ground — blows fuse; Faulty O2 sensor heater relay; Low system voltage

Can I drive with code P0141?

Limited: reaching the nearest workshop is fine, but avoid long trips. May progress into a more serious fault.

How do I diagnose P0141?

Read the code and freeze-frame with a scanner, check related-system errors, inspect the components listed (wiring, connectors, sensors). See the "How to diagnose" section above for the full step-by-step.

How do I clear code P0141?

The code can be cleared via an OBD-II scanner (e.g. ELM327 + the Car Diagnostics app): plug the adapter into the OBD port, go to Errors → Clear. If the underlying cause isn't fixed, the code will return within a few drive cycles.

OBD-II Code P0141 — Car Diagnostics Platform

What it means

Common causes

Open heater element — sensor needs replacement
Break in heater power wire
Heater shorted to ground — blows fuse
Faulty O2 sensor heater relay
Low system voltage
Poor connector contact

How to diagnose

01
Read all stored and pending codes with an OBD-II adapter — get the full picture, not just the one code.
02
Capture freeze-frame data (RPM, coolant temperature, engine load) at the exact moment the code triggered.
03
Inspect the named subsystem with our app's AI explanation — get vehicle-specific causes for your make, model and year.

Decode P0141 on your actual car

Plug in an OBD-II adapter and get an AI-powered diagnosis tailored to your vehicle make, model and year — in 30 seconds.

Try the demo